FUTABA 12FG Instruction Manual page 119

GOVERNOR mixing
When using a Futaba GV-1 governor, this
function is used to switch the RPM of the
helicopters head. Up to 3 rates can be set for each
condition.
*The governor is used by connecting the governor speed
setting channel to CH7 (initial setting).
*When using an independent governor [ON]/[OFF] switch,
connect the AUX([ON]/[OFF]) connector of the governor to
CH8 (initial setting) and set the switch to CH8 (Governor2)
at the Function menu of the Linkage Menu.
EDIT
Setting method
*When using the Fuel Mixture function, the mixture servo
is controlled from the governor. When transmitting the
mixture curve data from the transmitter to the governor, the
governor AUX (m.trm) connector must be connected to CH8
(initial setting) and governor side setting performed. See the
governor instruction manual.
(Currently selected condition name)
S1 button
EDIT dial
EDIT button
*VR selection and adjustment rate can be set.
<Functions of Model Menu (Helicopter Functions)>
S1
S1
E D I T
119