Restarting The Controller Using Cca - Cisco 521G - Unified IP Phone VoIP Configuration Manual

Restarting, Resetting, Backing Up, and Restoring
the Controller
This chapter describes how to restart the controller, reset the controller to factory defaults, backup the
controller configuration, and restore the controller configuration. The chapter contains these sections:
•
•
•
•
•
•

Restarting the Controller Using CCA

Follow these instructions to restart the controller using CCA:
Click Maintenance > Restart/Reset and
Step 1
OL-15283-01
Restarting the Controller Using CCA, page 6-1
Resetting the Controller to Factory Default Values Using CCA, page 6-3
Backing Up the Controller Configuration, page 6-4
Restoring the Controller Configuration, page 6-8
Manually Restarting the Controller Using the Reset Button, page 6-11
Manually Resetting the Controller to Factory Defaults, page 6-12
C H A P T E R
Figure 6-1 appears.
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
6
6-1