Wlc526 Controller Specifications - Cisco 521G - Unified IP Phone VoIP Configuration Manual

Chapter 1 Overview

WLC526 Controller Specifications

Table 1-2
Table 1-2
Item
Physical Interfaces
Wired/Switching/Routing protocols
Management Options
Security/Authentication Standards
RADIUS Authentication
Multiple Service Set Identifiers (SSIDs)
Support for Cisco Secure Guest Access
through CCA
Support for Voice-over-WLAN
Optimization
OL-15283-01
lists product specifications for the WLC526 controller.
WLC526 Controller Specifications
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
Specification
• Two 10/100 Ethernet ports for uplink and management
• Two USB console ports (future expansion)
One RJ-45 serial port for direct console access
•
IEEE 802.3 10BASE-T
•
IEEE 802.3u 100BASE-TX
•
IEEE 802.1Q VLAN tagging
•
CCA software (recommended primary interface)
•
• Controller web-browser interface
Limited command-line interface for troubleshooting
•
using Telnet, SSH, or console port access
• None/Open
• MAC Filtering
• WPA/Network EAP
• WPA-PSK/Open with EAP • WPA2/AES CCMP
• Protected EAP
• EAP- TLS
• EAP-SIM
• IEEE 802.1x RADIUS authentication (external RADIUS
server required)
Eight SSIDs supported (each access point may support
•
multiple SSIDs)
One SSID broadcast in SSID beacon
•
Guest SSID/VLAN
•
Auto-expiring guest user accounts
•
Custom guest login page
•
Quality of service
•
Call admission control
•
Fast inter-access point hand-off
•
• Other optimization features designed to improve the
quality of a wireless voice infrastructure
WLC526 Controller Overview
• WEP/Open
• WPA/Open with EAP
• WPA-PSK/Network EAP
• Cisco LEAP
• EAP Generic Token Card
1-5