Cisco 521G - Unified IP Phone VoIP Configuration Manual page 32

Adding a New Controller
Figure 2-8
Perform these operations:
Step 7
Enter a name for the controller (up to 31 ASCII characters) in the Hostname field.
a.
Note
Enter the administrator password (up to 24 ASCII characters) into the Password field.
b.
Note
Repeat the administrator password in the Confirm password field.
c.
Click Next and the Enter Device Setup Parameters window appears (see
d.
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
2-6
Step 6: Enter Hostname and User Authentication Information Window
The user name cannot contain these characters: space + # % / \ ? ; ' < > { } | ^ ~ [ ] ` " !
The password cannot contain these characaters: space + ? / \ < > # % { } | ^ ~ [ ] ` "
space + ? / \ < > # % { } | ^ ~ [ ] ` "
Chapter 2 Adding a WLC526 Controller and LAP521 Access Points
Figure 2-9).
OL-15283-01