Cisco 521G - Unified IP Phone VoIP Configuration Manual page 105

Chapter 8 Adding Employee Access with Web Authentication
–
Skip to
c.
If you choose WPA-PSK, WPA2, or WPA2-PSK security, perform these steps:
Step 11
Click the Encryption drop-down arrow and choose aes or tkip.
a.
Note
Enter the WPA pre-shared key (8 to 63 characters long).
b.
When finished, click OK and WLANs Window
Step 12
SSID added.
Figure 8-11
Click OK and a pop-up message
Step 13
new WLAN.
OL-15283-01
802.1x with fast roaming
Step 12 to finish the configuration.
The authentication is wpa-psk, wpa2-psk, or WPA2-PSK corresponding to the security type.
WLANs Window with New Employee WLAN SSID
(Figure
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
Creating a New WLAN SSID for the Employee VLAN
(Figure 8-11) reappears with the new employee WLAN
8-12) appears asking if you want to create WLAN users for the
8-9