Cisco 521G - Unified IP Phone VoIP Configuration Manual page 49

Chapter 4 Creating and Modifying WLANs and VLANs
Figure 4-3
Step 4 Click Create and the Create RADIUS Server window appears (see
Figure 4-4
Step 5 Perform these operations:
a. Enter the RADIUS server IP address in the IP Address field.
Enter the RADIUS server secret key in ASCII in the Secret Key (ASCII) field.
b.
Reenter the secret key in the Confirm Secret Key field.
c.
Click the Server Priority drop-down arrow and choose the priority (1 or 2). The primary server is
d.
used first and is specified by a priority of 1. The secondary server is used when the primary server
cannot be reached and is specified by a priority of 2.
e. Click the Admin Status drop-down arrow and choose Enabled (default) or Disabled.
Click OK and the RADIUS Server entry is listed in the RADIUS server table.
f.
Step 6 Click Apply and the RADIUS server configuration information is saved.
OL-15283-01
Configure RADIUS Servers Window
Create RADIUS Server Configuration Window
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
Creating a New WLAN
Figure 4-4).
4-3