Cisco 521G - Unified IP Phone VoIP Configuration Manual page 31

Chapter 2 Adding a WLC526 Controller and LAP521 Access Points
Figure 2-6
Step 4 Connect a Category 5 Ethernet cable from your PC and to Port 1 on the controller.
Step 5 When the wizard verifies successful connection, the Step 5: Verify Connection with Device window
displays a successful connection message (see
Figure 2-7
Step 6 Click Next and the Step 6 Enter Hostname and User Authentication Information window appears
(see Figure
OL-15283-01
Step 4: Connect Device to Your PC/Laptop Window
Step 5: Verify Connection with Device Window
2-8).
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
Figure 2-7).
Adding a New Controller
2-5