Cisco 521G - Unified IP Phone VoIP Configuration Manual page 50

Creating a New WLAN
Step 7 To configure a secondary RADIUS server, repeat Steps 5 and 6.
When done entering RADIUS servers information, click OK and a pop-up message (see
Step 8
appears asking if you want to create SSIDs using the RADIUS server.
Figure 4-5
Click Yes on the pop-up message and the WLANs (SSIDs) window appear again (see
Step 9
Click Create to create a WLAN and
Step 10
Figure 4-6
Choose the WLAN type by checking Data, Voice, or Guest.
Step 11
Note
Enter an SSID in the SSID field (up to 32 alphanumeric characters without spaces).
Step 12
Note
Uncheck Broadcast in Beacon if you don't want the SSID included in the beacon packets.
Step 13
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
4-4
Configure RADIUS Server Pop-Up Message
Create WLAN Window
For voice or data WLAN types, the VLAN ID is automatically selected.
For the guest WLAN type, the SSID can contain a space character but not a leading or trailing
space character.
Chapter 4
Figure 4-6 appears.
Creating and Modifying WLANs and VLANs
Figure
Figure 4-1).
OL-15283-01
4-5)