Cisco 521G - Unified IP Phone VoIP Configuration Manual page 118

Adding a Voice-Enabled VLAN
Note
b. From the Port list, select a port (1 or 2) for the VLAN. The default is 1.
In the IP Address field, enter an IP address for the VLAN.
c.
From the Subnet Mask list, accept the default or click the drop-down arrow and choose the subnet
d.
mask for the VLAN. The default is 255.255.255.0.
e. In the Gateway IP Address field, enter the IP address of the default gateway.
In the DHCP Server IP Address field, enter the IP address of the DHCP server.
f.
When you complete this window (see
g.
window.
Figure 9-4
A create VLAN pop-up message
Figure 9-5
Click OK and
Step 4
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
9-4
For Voice VLAN types, the VLAN name field is set with a predefined VLAN name that is
based on the selected VLAN type. It cannot be changed.
Typical Voice VLAN Data
(Figure
Create VLAN Pop-Up Message
Figure 9-6 appears and lists the new voice VLAN.
Chapter 9 Adding Voice Access with Web Authentication
Figure 9-4), click OK to save your changes and to close the
9-5) appears.
OL-15283-01