Cisco 521G - Unified IP Phone VoIP Configuration Manual page 124

Creating a New SSID for the Voice VLAN
Figure 9-13
f. Skip to
If you choose WPA security, perform these steps:
Step 7
a. Click the Encryption drop-down arrow and choose one of these options:
–
–
Click the Authentication drop-down arrow and choose one of these authentication options (see
b.
Figure
–
–
–
Figure 9-14
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
9-10
WEP Key Reminder Message
Step 9 to finish the configuration.
AES—Advanced Encryption Standard is a block cipher that can encrypt and decrypt data using
keys of 128, 192, or 256 bits.
TKIP—Temporal Key Integrity Protocol is an encryption that defends against an attack on
WEP in which the intruder uses an unencrypted segment called the initialization vector (IV) in
encrypted packets to calculate the WEP key.
9-14):
802.1x (default)
Fast roaming
802.1x with fast roaming
Configuring WPA Security Type
Chapter 9 Adding Voice Access with Web Authentication
OL-15283-01