Cisco 521G - Unified IP Phone VoIP Configuration Manual page 64

Upgrading Controller Software
Figure 5-1
Highlight your switch and click Upgrade Settings.
Step 2
Figure 5-2
Click the drop-down arrow in the Mode field and choose Standard or Remote TFTP Server.
Step 3
If you selected Standard, enter the path/filename of the controller software image in the IOS Image field
Step 4
or click Browse and navigate to the controller software image file on your hard drive.
If you selected Remote TFTP Server, perform these steps:
Step 5
Enter the filename of the controller software image in the IOS Image field.
a.
Enter the TFTP server IP address in the corresponding field.
b.
Note
Click OK and
Step 6
Cisco 500 Series Wireless Express Mobility Controller Configuration Guide
5-2
Controller Software Upgrade Window
Upgrade Settings Window
The controller software image file must be in your TFTP server download directory.
Figure 5-3 appears.
Chapter 5
Figure 5-2 appears.
Controller Software Upgrade
OL-15283-01