Stereo Mono - Yamaha A4000 Owner's Manual

STEREO MONO
[COMMAND/EXIT] Button
Press Knob 5
Converts stereo samples to mono.
[Operation]
1.
Select the stereo mono Type.
2.
Select the sample to be converted.
3.
Specify the sample name for the new mono sample.
4.
Press Knob 1 (EXEC) or Knob 5 (EXEC&CONT), and the stereo
mono confirmation display will appear. Press Knob 5 (YES) to exe-
cute the stereo mono operation.
• If Knob 1 (EXEC) is used to execute the command, the display pre-
vious to the command menu will be recalled after execution has fin-
ished. If Knob 5 (EXEC&CONT) is used to execute the command,
the stereo mono display will be retained so you can continue and
perform further stereo
q
Cursor
Cursor
q
Knob 1 Knob 2
Turn
Cursor —
action
Press
EXEC —
action
Knob 1
[ Turn] Cursor
Positions the cursor.
[ Press] EXEC
Press this knob to call the stereo
display. Press Knob 5 (YES) to actually execute the ste-
reo mono operation.
Knob 3
[ Turn] Stereo Mono Type
Specifies whether both channels of the original stereo
sample or only the left or right channel are to be con-
verted to a mono sample.
[Range] L+R Mono, L
• L+R Mono ... The left and right channels of the
original sample are mixed and converted to a
mono sample.
• L Mono ... Only the left channel of the original
stereo sample is converted to a mono sample.
• R Mono ... Only the right channel of the original
stereo sample is converted to a mono sample.
Knob 1 to highlight display line 3
mono operations.
Knob 3 Knob 4 Knob 5
Stereo
— Sample
Mono Type
— — EXEC&CONT
mono confirmation
Mono, R Mono
Knob 5
[ Turn] Sample
Selects the sample to be processed.
[Range] All samples in memory
[ Press] EXEC&CONT
Press this knob to call the stereo
display. Press Knob 5 (YES) to actually execute the ste-
reo mono operation.
w
Cursor
Cursor
w
Knob 1 Knob 2
Turn
Cursor —
action
Press
EXEC —
action
Knob 1
Same function as Cursor
Knob 3
[ Press] RENAME...
Press to call the character-entry display for the currently
selected sample name. See page 81 for details on char-
acter entry.
Knob 5
[ Press] EXEC&CONT
Press this knob to call the stereo
display. Press Knob 5 (YES) to actually execute the ste-
reo mono operation.
A5000/A4000 •
About the COMMANDS
mono confirmation
Knob 3 Knob 4 Knob 5
— — —
RENAME... — EXEC&CONT
q
(page 225).
mono confirmation
225
Chapter 9 COMMAND