Move - Yamaha A4000 Owner's Manual

About the COMMANDS

MOVE

[COMMAND/EXIT] Button
Press Knob 2
Moves the samples assigned to a program to a sample bank,
or the samples in a sample bank to another sample bank or
program.
• This command can be used to combine two sample banks into one,
or consolidate all the samples in a program that was created with-
out using sample banks into a sample bank, etc.
[Operation]
1.
Select the Move Type.
2.
Select the program or sample bank to be moved.
3.
Select the destination program or sample bank.
4.
Press Knob 1 (EXEC) or Knob 5 (EXEC&CONT), and the move
confirmation display will appear. Press Knob 5 (YES) to execute
the move operation.
• If Knob 1 (EXEC) is used to execute the command, the display pre-
vious to the command menu will be recalled after execution has fin-
ished. If Knob 5 (EXEC&CONT) is used to execute the command,
the move display will be retained so you can continue and perform
further move operations.
q
Cursor
Cursor
q
Knob 1 Knob 2
Turn
Cursor —
action
Press
EXEC —
action
Knob 1
[ Turn] Cursor
Positions the cursor.
[ Press] EXEC
Press this knob to call the move confirmation display.
Press Knob 5 (YES) to actually execute the move opera-
tion.
Knob 4
[ Turn] Move Type
Specifies what type of data is to be moved to what type of
destination, and how Easy Edit parameters are to be han-
dled.
[Range] Program
Program(Freeze)
SampleBank Program,
SampleBank(Freeze)
SampleBank SampleBank
226
Chapter 9 COMMAND
Knob 1 to highlight display line 4
Knob 3 Knob 4 Knob 5
— Move Type
— — EXEC&CONT
SampleBank,
SampleBank,
Program,
• A5000/A4000
Knob 5
[ Press] EXEC&CONT
Press this knob to call the move confirmation display.
Press Knob 5 (YES) to actually execute the move opera-
tion.
w
Cursor
—
Cursor
w
Knob 1
Turn
Cursor
action
Press
EXEC
action
Knob 1
Same function as Cursor
Knob 2
[ Turn] From Program
Specifies the source program from which samples are to
be moved. This parameter can be used when the Move
Type is set to Program SampleBank or Pro-
gram(Freeze) SampleBank.
[Range] 001 — 128
• Program SampleBank ... All samples assigned
to the selected program (not including sample
banks or samples contained in sample banks)
are moved to the selected sample bank.
• Program(Freeze) SampleBank ... After applying
the Easy Edit parameters to the samples
(Freeze — page 213), all samples assigned to
the selected program (not including sample
banks or samples contained in sample banks)
are moved to the selected sample bank.
• SampleBank Program ... All samples contained
in the selected sample bank are removed from
the sample bank and assigned to the selected
program.
• SampleBank(Freeze) Program ... After applying
the sample bank parameters to the samples it
contains (Freeze — page 213), all samples
contained in the selected sample bank are
removed from the sample bank and assigned
to the selected program.
• SampleBank SampleBank ... All samples con-
tained in the selected sample bank are moved
to a second selected sample bank.
Knob 2 Knob 3 Knob 4
From
From Program To Program
SampleBank
— — —
q
(page 226).
Knob 5
To
SampleBank
EXEC&CONT