Map/Out; Mix & Key Range; [F2] Map/Out; Mix&Key - Yamaha A4000 Owner's Manual

2. MAP/OUT

You use the MAP/OUT function to set the sample's "original
key," key range, output destinations, output level, tuning, and
related settings.
• Keep in mind that the [COMMAND/EXIT] button gives you rapid
access to a number of helpful commands while you are working
with this function. For example, you can use the [COMMAND/EXIT]
button when you want to save your edit results to disk, or when you
want to cancel your new changes and restore the previously saved
data.
Press the [EDIT] button and then the [F2] button to go to the
MAP/OUT function.
4 display pages are provided: Mix&Key (Mix & Key Range),
Pitch (page 129), Exp&Vel (Expand & Velocity Range —
page 131), and LvlScal (Level Scaling — page 132).
• See the "Basic Operation" section on page 78 for details on switch-
ing between display pages.
Mix & Key Range
[EDIT] Button [F2] Button
"EDIT-Mix&key
Provides settings for sample level, key range, and output.
q
Cursor (Level)
Cursor
q
Knob 1 Knob 2
Turn
Cursor/Page Sample Level
action
Press
Tree View QUICK...
action
Knob 1
[ Turn] Cursor/Page
Positions the cursor and selects display pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[ Turn] Sample Level
Turn the knob to set the sample's output level.
[Range] 0 — 127
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 1 to select
Knob 3 Knob 4 Knob 5
Velocity
Sample Pan Poly/Mono
Sensitivity
QUICK... QUICK.. —
Knob 3
[ Turn] Sample Pan
Turn the knob to set the sample's pan (stereo position).
[Range] Rnd, -63 — +63
• Rnd ... The pan position changes randomly with
each note played.
• -63 — +63 ... Positive values set the pan to the
right; negative values move the pan to the left.
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 4
[ Turn] Velocity Sensitivity
This value sets the sample's velocity sensitivity. The
velocity sensitivity determines how the sample's output
level varies in response to changes in velocity.
[Range] -127 — +127
A value of 0 produces constant output level for
all velocities within the velocity range. Positive
values causes output level to increase with
increasing velocity, while negative settings have
the opposite effect.
• You can use the UTILITY – MIDI Channel page to set
the adjustment that the A5000/A4000 applies to
received velocity values before transmitting them to
the internal tone generator. (page 200)
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 5
[ Turn] Poly/Mono
Select Mono if you want to limit playback of this sample to
one note at a time. Select Poly to enable simultaneous
playback of multiple notes.
[Range] Poly, Mono
• Poly ... The sample can be played polyphonically
(several notes can be played at once).
• Mono ... Only one note can be played at a time.
A5000/A4000 •
EDIT-MAP/OUT
127
Chapter 5 EDIT Mode