Setting The Input Mode (Stereo Or Mono) - Yamaha D5000 Quick Reference Manual

Setting the Input Mode (Stereo or Mono)

Use the following procedure to select stereo or monaural input for the current program.
Note that the selected mode is effective even when BYPASS is being used.
1
Press [DELAY] as many times as necessary to dis-
play one of the following screens.
DELAY
2
Move the cursor to "INPUT MODE" or "TRACK."
CURSOR
3
Use the DATA ENTRY dial to select the input
mode.
DATA ENTRY
<If you are working with a Single or Dual delay program:>
<If you are working with a Freeze or S&H program:>
<If you are working with a Single or Dual delay program:>
<If you are working with a Freeze or S&H program:>
4