Load Os - Yamaha A4000 Owner's Manual

Cursor w
Cursor
w
Knob 1 Knob 2
Turn
Cursor Track#
action
Press
EXEC INSERT
action
Knob 1
Same function as Cursor
Knob 2
[ Turn] Track # (Track Number)
Selects the track number to which the samples are to be
written.
[Range] TR1 — TR99
• "End of List" will appear at the first line number for
which a disk or volume has not been selected. Line
numbers past the "End of List" line cannot be
selected. For this reason, line numbers 2 and higher
cannot be selected when no disk or volume selec-
tions have been made.
• Disks listed up to the "End of List" line will be backed
up.
[ Press] INSERT
Inserts a new track at the currently selected track posi-
tion. All track numbers following the inserted track will be
moved up by one up to a maximum of 99. Any data previ-
ously assigned to track 99 will be erased.
Knob 3
[ Turn] Volume
Selects the volume which contains the samples which are
to be written to the track number specified by Knob 2.
[Range] All volumes on the currently selected disk.
• Disk selection is carried out via the Disk Select
parameter (DISK – DISK – Disk, page 173).
• Samples stored on separate disks cannot be
recorded to a single CD-R or CD-RW disk.
[ Press] DELETE
Deletes the selected track. All track numbers following the
deleted track are moved back by one, and a new empty
track will be created for track 99.
Knob 5
[ Press] EXEC&CONT (Execute & Continue)
Press this knob to call the CD-DA confirmation display.
Press Knob 5 (YES) to actually execute the CD-DA oper-
ation.
Knob 3 Knob 4 Knob 5
Volume — Sample
DELETE — EXEC&CONT
q
(page 184).

LOAD OS

[DISK] Button [COMMAND/EXIT] Button
Knob 1 to highlight display line 2
Allows an OS file to be loaded in order to update the sam-
pler's operating system.
• When LOAD OS is executed all data in the sampler's memory will
be erased!
[Operation]
1.
Use Knob 3 to select the OS File Type.
2.
Use Knob 4 to select the destination disk.
3.
Use Knob 5 (EXEC&CONT) to initiate execution. When the "Load
OS? (Param&Wave memory will be erased)" confirmation display
appears, press Knob 5 (YES) to execute the load OS operation.
4.
When loading has finished, the "Upgrade OS?" confirmation dis-
play will appear. Press Knob 4 (NO) if you don't want to upgrade
the operating system, or Knob 5 (YES) if you do want to upgrade
the operating system.
5.
If you choose not to upgrade the operating system, "OS will not be
upgraded. Please restart" will appear and you will need to restart
the A5000/A4000.
If you choose to upgrade the operating system "Please wait a few
seconds" will appear, then when the operating system has been
upgraded "After all [F1] — [F6] red lamp lighting, please restart"
will appear and you will need to restart the A5000/A4000.
• See page 86 for the restart procedure.
Knob 1 Knob 2
Turn
— —
action
Press
— —
action
Knob 3
[ Turn] OS File Type
Selects the type of OS file to be loaded.
[Range] Main, Sub, Boot (Main, Boot on the A4000)
• Main ... Loads the OS file for the main CPU.
• Sub ... Loads the OS file for the secondary (sub)
CPU.
• Boot ... Loads the OS file for the boot block of the
main and sub CPUs.
A5000/A4000 •
7. DISK COMMANDS
Press Knob 4
Knob 3 Knob 4 Knob 5
OS File Type Disk —
— — EXEC&CONT
185
Chapter 7 DISK Mode