Program Lfo; Pgmlfo - Yamaha A4000 Owner's Manual

Professional sampler
Hide thumbs Also See for A4000:
Table of Contents

Advertisement

Program LFO

[PLAY] Button
[F6] Button
"PLAY-PgmLFO"
Sets up the Program LFO.
The Program LFO can be synchronized to a MIDI clock sig-
nal from an external MIDI device to control programs and
samples. Use MIDI clock synchronization and the StepWave
LFO waveform, perfectly synchronized note-length control
becomes possible.
• In order to use the Program LFO to control programs and /or sam-
ples, the program and/or sample controller parameter must be set
to "Program LFO."
• The Program LFO will not function while the internal sequencer is
running.
Cursor q
Cursor
q
Knob 1
Knob 2
Turn
Program LFO
Cursor/Page
action
Wave
Press
Tree View
action
Knob 1
[
Turn] Cursor/Page
Positions the cursor to select a controller, and selects dis-
play pages.
[
Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[
Turn] Program LFO Wave
Specifies the waveform of the program LFO.
[Range] off, Sine, Saw, Triangle, Square, S/H, StepWave
• off ... The Program LFO will not function.
• Sine
Modulation
Knob 1 to select
Knob 3
Knob 4
Knob 5
Program LFO
Program LFO
Program LFO
Sync
Tempo
Cycle
QUICK...
Time
• Saw
Modulation
• Triangle
Modulation
• Square
Modulation
• S/H (Sample and Hold) ... Random variation is produced.
Modulation
• StepWave ... The wave created by using the Cursor
page is used.
Knob 3
[
Turn] Program LFO Sync
Determines whether or not the LFO speed will be syn-
chronized to an external MIDI controller.
[Range] Manual, MIDI-A,
MIDI-B (Manual, MIDI on the A4000)
• Manual ... The speed specified by the Progral LFO
Tempo parameter is used.
• MIDI-A ... The LFO speed is synchronized to a
MIDI clock signal received via the MIDI IN-A
connector.
• MIDI-B ... The LFO speed is synchronized to a
MIDI clock signal received via the MIDI IN-B
connector.
• When Program LFO Sync is set to MIDI-A or MIDI-B
(MIDI on the A4000), the Program LFO Tempo, Pro-
gram LFO Phase Reset Channel, and Program LFO
Phase Reset Note parameters will appear as "---" on
the display and cannot be edited.
A5000/A4000 •
PLAY-CONTROL
Time
Time
Time
Time
e
parameter on this
113
Chapter 4 PLAY Mode

Advertisement

Table of Contents
loading

This manual is also suitable for:

A5000

Table of Contents