Effect; Effect Setup A; [F4] Effect; Efsetupa - Yamaha A4000 Owner's Manual

PLAY-EFFECT

4. EFFECT

Selects and sets up the effects to be used with the current pro-
gram.
Press the [PLAY] button and then then [F4] function button to
enter the effect mode. 3 display pages are provided: EfSetupA
(Effect Setup A), EfSetupB (Effect Setup B), and EfEdit
(Effect Edit).
The A4000 does not have an EfSetupB page, only a single
EfSetup page in place of the A5000's EfSetupA page.
• See "Basic Operation" on page 78 for details on accessing the var-
ious display pages.
• When "off", "StereoOut, "AsgnOutL&R" — "AsgnOut5&6" or
"DIG&OPT" is selected as the sample output destination, no effect
will be applied to the sound. In order to use the effects be sure to
select "Ef1 — 6" ("Ef1 — 3" on the A4000). See page 129.
• The sample's output destination can also be set via the EASY EDIT
function (page 97).
• When the program mode is set to "Multi" (page 89), the master pro-
gram effect settings take priority (the master program is the pro-
gram selected for the part assigned to the basic channel). If an
effect function is accessed when any other part is selected "Not a
Master Part" will appear on the display. If this happens select an
appropriate part via the PLAY-PROGRAM-PgmSel page (page 89),
and then use the effect functions.

Effect Setup A

[PLAY] button [F4] button
"PLAY-EfSetupA" ("EfSetup" on the A4000).
EFFECT SETUP A provides access to the Effect 1 — 3 effect
types and three different effect connection types.
Knob 1 Knob 2
Turn
Cursor/Page Effect Type
action
Press
Tree View LIST...
action
Knob 1
[ Turn] Cursor/Page
Positions the cursor to select effect 1 — 3, and selects
display pages.
[ Press] Tree View
Calls the Tree View display (page 83).
102
Chapter 4 PLAY Mode
Knob 1 to select
Knob 3 Knob 4 Knob 5
Effect1...3 Effect4...6
Effect Output
Connect Connect
Effect1 Effect2 Effect3
BYPASS BYPASS BYPASS
• A5000/A4000
Knob 2
[ Turn] Effect Type
Select the effect type to be applied as Effect 1 — 3. For
information about available selections, refer to the "Effect
type list" in the appendix. (page 256)
[ Press] LIST... (Effect Type List)
Shows a list of the effect types.
Knob 3
[ Turn] Effect Output
Selects the output destination for Effect 1 — 3.
[Range] StereoOut, AsgnOutL&R, AsgnOut1&2,
AsgnOut3&4, AsgnOut5&6, DIG&OPT, Ef4, Ef5,
Ef6
• StereoOut ... Output is sent to the rear-panel STE-
REO OUT jacks as well as the front-panel
PHONES jack.
• AsgnOutL&R ... The rear-panel assignable output
jacks.
• AsgnOut1&2, AsgnOut3&4, AsgnOut5&6 ... The
corresponding assignable outputs on the
optional AIEB1 I/O expansion board.
• DIG&OPT ... The coaxial and optical digital outputs
on the optional AIEB1 I/O expansion board.
• Ef4, Ef5, Ef6 ... Output is routed to the specified
effect (not available on the A4000).
• When the output is connected to another effect "------
-----" will appear on the display and the effect output
can not be selected.
• The AsgnOut1&2, AsgnOut2&4, and AsgnOut5&6
output destinations cannot be selected unless the
optional AIEB1 I/O expansion board is installed.
[ Press] Effect1 BYPASS
The Effect1 effect type display will appear as " (Bypass)"
and Effect1 will be temporarily bypassed (no effect).
Press a second time to to re-engage the effect.