3. SEQUENCE
SEQUENCE allows sequences to be loaded into the sampler's
memory from floppy disk, hard disk, or other media to which
they have been saved.
Press the [DISK] button and then the [F3] button to go to the
SEQUENCE display.
1 display page is provided: SeqLoad (Sequence Load).
SeqLoad
[DISK] Button
[F3]Button
Use this page to load one or all sequences from disk.
Cursor q
Cursor
q
Knob 1
Knob 2
Turn
Cursor
Disk
action
Press
Tree View
—
action
Knob 1
[
Turn] Cursor
Positions the cursor.
[
Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[
Turn] Disk
Selects the floppy disk, hard disk, or other storage media
from which a sequence is to be loaded. When a disk is
selected, all volumes it contains are listed below the disk
name, and all sequences contained in the selected vol-
ume are listed on the right side of the display. When a
hard disk, CD-ROM drive or similar storage device is
selected, the SCSI ID number or IDE M/S (Master/Slave)
status of the device is shown to the right of the disk
name.
[Range] All installed/connected disks.
• If a connected SCSI or IDE device (hard disk, ZIP
drive, etc.) cannot be selected, go to the disk select
display (DISK-DISK-Disk) and check the mount/
unmount status and SCSI ID settings of the device
(page 173).
Knob 3
[
Press] DELETE
Deletes the selected sequence from the disk. A confirma-
tion display will appear when the knob is pressed. Press
Knob 5 (>YES) to actually execute the delete operation.
to select "DISK-SeqLoad"
Knob 3
Knob 4
Knob 5
—
Sequence
—
DELETE
LOAD
LOAD ALL
Knob 4
[
Turn] Sequence
Selects the sequence to be loaded.
Sequences cannot be selected if a non-native disk or a
multi-segment floppy disk is selected.
[Range] All sequences in the selected volume.
[
Press] LOAD
Initiates loading of the selected sequence. A confirmation
display will appear when the knob is pressed. Press Knob
5 (>YES) to actually execute the load operation.
If a sequence with the same name as one being loaded
exists in memory a display allowing you to choose how to
handle the situation will appear (see page 170).
Knob 5
[
Press] LOAD ALL
All sequences in the currently selected volume will be
loaded. When the knob is pressed a confirmation display
will appear. Press Knob 5 (>YES) to actually execute the
load operation.
If a sequence with the same name as one being loaded
exists in memory a display allowing you to choose how to
handle the situation will appear (see page 170).
Cursor w
Cursor
w
Knob 1
Knob 2
Turn
Cursor
Volume
action
Press
Tree View
—
action
Knob 1
Same function as Cursor
Knob 2
[
Turn] Volume
Selects the volume containing the sequence to be
loaded.
[Range] All volumes on the selected disk.
• When a volume is selected the sequence list is
updated to show all the sequence in the selected vol-
ume.
Knob 3 — 5
Same function as Cursor
A5000/A4000 •
DISK-SEQUENCE
Knob 3
Knob 4
Knob 5
—
Sequence
—
DELETE
LOAD
LOAD ALL
q
(page 171).
q
(page 171).
171
Chapter 7 DISK Mode