Total Eq; Total Equalizer - Yamaha A4000 Owner's Manual

1. TOTAL EQ

This function sets up the 4-band equalizer applied to the ste-
reo-output signal.
Press the [UTILITY] button and then the [F1] button to go to
the TotalEQ function.
This function has only one page: TotalEQ (Total Equalizer).
You set up the equalizer by setting its Gain, Frequency, and
Width parameters. The following illustration shows how these
parameters operate on the output frequency.
Low
Width
Level
LowBoost Low
Gain Gain
Middle
Gain
LowBoost Low
Freq Freq
• The Total Equalizer does not affect the signal appearing at the
assignable outputs. When the Stereo Out To Assignable Out
parameter is not set to "off" (UTILITY-MASTER-output, page 195),
the Total Equalizer does affect the signal appearing at the specified
assignable outputs.
• The equalization you set here applies to all sound directed to the
stereo output. If you have set the A5000/A4000 up temporarily in a
studio or sound stage, the equalizer offers a convenient way to
make final adjustments to match the acoustics of your environment.

Total Equalizer

[UTILITY] Button [F1] Button
This function sets up the 4-band equalizer applied to the ste-
reo-output signal.
q
• Cursor (Gain): Sets the gain values for the equalizer.
w
• Cursor (Frequency): Sets the equalizer frequency points.
e
• Cursor (Width): Sets the equalizer band widths.
Middle High
Width Width
High
Gain
Frequency
Middle High
Freq Freq
"UTIL-TotalEQ"
Cursor q (Gain)
Cursor
q
Knob 1 Knob 2
Turn Low Boost
Cursor
action Gain
Press
Tree View QUICK...
action
Knob 1
[ Turn] Cursor
Positions the cursor.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[ Turn] Low Boost Gain
Sets the low-frequency boost.
[Range] -12dB — +12dB
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 3
[ Turn] Low Gain
Sets the gain for the low-frequency band.
[Range] -12dB — +12dB
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 4
[ Turn] Middle Gain
Sets the gain for the mid-frequency band.
[Range] -12dB — +12dB
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 5
[ Turn] High Gain
Sets the gain for the high-frequency band.
[Range] -12dB — +12dB
[ Press] QUICK...
Calls the quick entry menu (page 83).
A5000/A4000 •
UTILITY-TOTAL EQ
Knob 3 Knob 4 Knob 5
Low Gain Middle Gain High Gain
QUICK... QUICK... QUICK...
189
Chapter 8 UTILITY Mode