Filter Scaling - Yamaha A4000 Owner's Manual

Professional sampler
Hide thumbs Also See for A4000:
Table of Contents

Advertisement

e
Cursor
(Equalizer)
Cursor
e
Knob 1
Knob 2
Turn
Sample EQ
Cursor/Page
action
Type
Press
Tree View
action
Knob 1
Same function as Cursor
Knob 2
[
Turn] Sample EQ Type
Specifies the EQ type.
[Range] Peak/Dip, LoShelv, HiShelv
• Peak/Dip ... Specifies a peak/dip type filter curve
which allows a band of frequencies around the
specified EQ frequency to be emphasized or
de-emphasized.
• LoShelv ... Specifies a low-shelving filter curve
which allows frequencies lower than the speci-
fied EQ frequency to be emphasized or de-
emphasized.
• HiShelv ... Specifies a high-shelving filter curve
which allows frequencies higher than the
specified EQ frequency to be emphasized or
de-emphasized.
Knob 3
[
Turn] Sample EQ Frequency
Turn the knob to set the equalizer's frequency point.
[Range] 32Hz — 16.0kHz
• The selectable range will depend on the selected EQ
type.
[
Press] QUICK...
Calls the quick entry menu (page 83).
Knob 4
[
Turn] Sample EQ Gain
This value sets the gain at the equalizer's frequency
point.
[Range] -12dB — +12dB
[
Press] QUICK...
Calls the quick entry menu (page 83).
Knob 5
[
Turn] Sample EQ Width
This value determines the width of the emphasis or atten-
uation band. Note that smaller values increase the width,
while larger values decrease the width.
[Range] 1.0 — 12.0
Knob 3
Knob 4
Knob 5
Sample EQ
Sample EQ
Sample EQ
Frequency
Gain
Width
QUICK...
QUICK...
QUICK...
q
(page 133).
• This parameter can only be used when the Peak/Dip
EQ type is selected.
[
Press] QUICK...
Calls the quick entry menu (page 83).

Filter Scaling

[EDIT] Button
[F3] Button
"EDIT-FltrScal"
Filter scaling produces filter cutoff frequency variations over
a specified range of notes.
• No filter cutoff variation beyond the maximum available range will
be produced even if the Filter Scaling Cutoff1 (Knob 2) and Filter
Scaling Cutoff2 (Knob 5) parameters in this page are set so that
this range would be exceeded.
Knob 1
Knob 2
Turn
Filter Scaling
Page
action
Cutoff1
Press
Tree View
QUICK...
action
Frequency
Applied cutoff frequency.
Filter Scaling
Cutoff frequency
Cutoff1
set by Cutoff
parameter on
Filter page.
Filter Scaling
Breakpoint 1
Knob 1
[
Turn] Page
Selects display pages.
[
Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[
Turn] Filter Scaling Cutoff1
Sets the amount of filter cutoff variation at the Filter Scal-
ing Breakpoint1 note.
[Range] -127 — +127
[
Press] QUICK...
Calls the quick entry menu (page 83).
A5000/A4000 •
EDIT-FILTER
Knob 1 to select
Knob 3
Knob 4
Knob 5
Filter Scaling
Filter Scaling
Filter Scaling
Breakpoint1
Breakpoint2
Cutoff2
MIDI
MIDI
QUICK...
Filter Scaling
Cutoff2
Pitch
(Note)
Filter Scaling
Breakpoint 2
135
Chapter 5 EDIT Mode

Advertisement

Table of Contents
loading

This manual is also suitable for:

A5000

Table of Contents