Pitch Eg; Pitcheg - Yamaha A4000 Owner's Manual

EDIT-EG
Knob 2
[ Turn] FEG Rate Scaling
This setting determines how the FEG rates (FEG attack,
FEG decay, and FEG release rates) vary according to
keyboard location (pitch) of the played note.
Set the value to 0 to keep rates the same for all keyboard
notes. Positive settings cause rates to increase as you
move up the keyboard, while negative settings cause
rates to decrease as you move up the keyboard.
[Range] -7 — +7
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 3
[ Turn] FEG Rate Velocity Sensitivity
This value sets the velocity sensitivity of the FEG rates:
the amount by which the FEG rates (FEG attack, FEG
decay, and FEG release rates) vary in response to the
velocity (force) of the played note.
Set the value to 0 to keep rates the same for all velocities.
Positive settings cause rates to increase as velocity
increases, while negative settings cause rates to
decrease as velocity increases.
[Range] -63 — +63
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 4
[ Turn] FEG Attack Level Velocity Sensitivity
This parameter sets the first velocity-sensitivity value for
the FEG's initial level and attack level. The value operates
together with the value set by Knob 5 to determine the
amount by which these levels vary in response to the
velocity of the played note.
Positive settings cause levels to increase as velocity
increases, while negative settings cause levels to
decrease as velocity increases.
[Range] -63 — +63
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 5
[ Turn] FEG Level Velocity Sensitivity
This parameter sets the general velocity sensitivity for all
FEG levels (FEG initial, FEG attack, FEG sustain, and
FEG release). Positive settings cause levels to increase
as velocity increases, while negative settings cause lev-
els to decrease as velocity increases.
[Range] -63 — +63
[ Press] QUICK...
Calls the quick entry menu (page 83).
140
Chapter 5 EDIT Mode
• A5000/A4000

Pitch EG

[EDIT] Button [F4] Button
"EDIT-PitchEG"
Use this page to set up the sample's PEG (pitch envelope gen-
erator). The PEG determines how the pitch varies over time as
each note plays out.
Pitch (high)
Initial Level
Basic Pitch
Pitch (low)
Attack Rate Decay Rate
Note On
q
Cursor (Pitch EG Rate)
Cursor
q
Knob 1 Knob 2
Turn
Cursor/Page —
action
Press
Tree View —
action
Knob 1
[ Turn] Cursor Position/Page Selection
Positions the cursor and selects display pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 3
[ Turn] PEG Attack Rate
This value sets the rate at which the pitch moves from its
initial level (at Note On) to the attack level. Higher values
produce faster rates.
[Range] 0 — 127
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 1 to select
Sustain Level
Time
Attack Level
Release Level
Release Rate
Note Off
Knob 3 Knob 4 Knob 5
PEG Attack PEG Decay PEG Release
Rate Rate Rate
QUICK... QUICK... QUICK...