Direct Load - Yamaha QY-300 Owner's Manual

Direct Load

You can use the [F6]
function key ("Exit") to
exit from the DISK
mode at any time except during
the actual disk operation.
The Disk Mode
Press the [F6] function key ("Load") from the SONG, PATTERN, PHRASE,
or CHAIN mode to go directly to the corresponding disk load display.
Move cursor here and scroll via cursor
keys to select the file to be loaded.
The data dial and numeric keypad can
also be used to specify the file number.
File names appear in alphabetical order.
After selecting the file to be loaded and the song, style, or phrase to which it is
to be loaded (there's no need to specify a destination from the CHAIN mode
since all data is loaded), press the [ENTER] key to begin the save operation.
If the specified destination already contains data, the QY300 will ask you
to confirm that you want to overwrite the existing data with the "Delete Old
Data?" display.
Press the [+1/YES] key to go ahead with the load operation, or the
[–1/NO] key to cancel. An "Executing" bar graph will appear while the data is
being loaded, then the SONG, PATTERN, PHRASE, or CHAIN mode display
will reappear.
In addition to save and load operations, the DISK mode allows you to format
new disks as well as delete and rename existing files.
Press the [DISK] mode button to engage the DISK mode.
Number of files of the current type
(in this case, 3 song files are available).
Disk Operations
Size of the selected file
(kilobytes).
Cursor here to specify the song,
pattern, or phrase number to
which the specified file will be
loaded (not available for all-data
files loaded via the CHAIN mode).
121