Compaq 219700-001 - ProLiant - 1500 Reference Manual page 96

6-28
Installing the Operating System Drivers
10. Later during Windows NT installation, reinsert the Windows NT SSD
diskettes when prompted. The Setup program will copies the drivers to
the system.
11. Finish installing Windows NT.
Installing the Compaq SMART-2DH Controller
Driver after Windows NT Installation
Execute the Setup program in the root directory of the Windows NT Support
Software Diskette utility to install or update the driver. This installation
program will copy the appropriate driver and configure the system to use this
driver.
1. Start Windows NT 3.51 or NT 4.0 and log in to an account with
administrative privileges.
2. Insert the Windows NT SSD diskettes, one at a time, into the diskette
drive.
3. From the Program Manager, select File
4. Enter the following:
5. The Setup program presents a list of drivers that can be installed.
Select Compaq SCSI Controllers Support - Install/Remove.
6. Select Continue. In the SCSI Adapter Setup window, select Add. A
Setup dialog box will be displayed asking you to confirm the addition
of a SCSI controller (adapter). Select OK.
7. Scroll through the Adapter list and select Other.
8. When prompted for the path to the SCSI Adapter files, enter:
Select Continue.
9. Select Compaq Drive Array from the list of drivers to install. Select OK.
Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002
A:\setup
A:\scsi\array
File Name: G-CH06.DOC Last Saved On: 2/27/98 12:01 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED


Run.