Compaq 219700-001 - ProLiant - 1500 Reference Manual page 53

5-12
Running the Array Configuration Utility
8. Click the Done button to return to the Main Configuration screen. The
Logical Configuration View area should now look similar to the
following figure.
Figure 5-6. Example Array - Logical Configuration View with 1 Array
9. Select the controller, then click the Create Array button to create
Array B.
10. Assign both 4.3-GB drives to the array. Click the Done button.
NOTE:
SCSI Port. You can achieve better performance by selecting drives from both
ports for an array, assuming you installed the correct drives in both ports
before you ran the Array Configuration Utility.
Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002
In this example, each array was created using drives from the same
File Name: F-CH05.DOC Last Saved On: 2/27/98 11:38 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED