Compaq 219700-001 - ProLiant - 1500 Reference Manual page 33

The latest version of firmware for the SMART-2DH Controller firmware has
already been installed. If you have older SMART-2DH Controllers or other
Compaq options, such as drives, create the Option ROMPaq diskettes and
check that the firmware on these options is at the latest revision.
To run Option ROMPaq:
1. Place the Option ROMPaq diskette 1 in the server floppy drive.
2. Boot the server by turning on the power.
3. Press Enter at the Welcome screen.
4. At the Select A Device screen, select:
ALL COMPAQ SMART-2DH Controller(s)
from the list of programmable devices. Press Enter.
5. If the ROM firmware in the SMART-2DH Controller is the same or
newer than that on the Option ROMPaq diskette, you will get the
message:
The ROM image files found for the device selected
are not newer than the current ROM image
Press Enter to go to step 9.
OR
If the ROM firmware in the SMART-2DH Controller is older than that
on the Option ROMPaq diskette, you will get the Select An Image
screen:
Device to reprogram:
Current ROM revision:
Select Firmware Images:
Press Enter.
Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002
File Name: D-CH03.DOC Last Saved On: 2/27/98 11:26 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
ALL COMPAQ SMART-2DH Controller(s)
COMPAQ SMART-2DH Controller x.xx
COMPAQ SMART-2DH Controller y.yy
SMART-2DH Array Controller Reference Guide
3-5