Compaq 219700-001 - ProLiant - 1500 Reference Manual page 62

Figure 5-13 shows an example of a physical view of a SMART-2DH Array
Controller in slot 3. Listed below the controller are two unassigned drives, one
4.3-GB drive and one 1.05-GB drive. This controller has two drive arrays,
named Array A and Array B, along with a number of drives within each array.
Array A has an online spare.
NOTE: When viewing the configuration list box, selecting an item—a
controller, array, logical drive, or physical drive—will cause the drive tray
LEDs to blink. Use this feature to identify a specific physical drive, i.e., the
spare, or to identify the external drives attached to a controller. This feature
works with firmware versions 1.50 or greater.
More Information Button
The More Information button, shown in Figure 5-14, is located at the bottom
right side of the screen. Click this button to display a list of all the controller,
drive, and array configuration details available for the selected items.
Drive View Buttons
This box, shown in Figure 5-14, is located at the bottom left side of the
screen. The Drive View box lets you to switch between the logical and
physical drive views. Select which representation you would like to see in the
View Configuration list box.
Figure 5-14. More Information and Drive View buttons
Controller Buttons
The top right corner of the screen contains the Controller box, which becomes
active after you select a controller in the Controller Select box.
Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002
File Name: F-CH05.DOC Last Saved On: 2/27/98 11:38 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
SMART-2DH Array Controller Reference Guide
5-21