Compaq 219700-001 - ProLiant - 1500 Reference Manual page 34

3-6
Updating the Firmware
6. Review the information on the Caution screen:
Press Enter to reprogram the SMART-2DH Controller ROM or Esc
to discontinue the reprogramming and return to the Select An
Image screen.
7.
indicates that the SMART-2DH Controller ROM is being
reprogrammed. DO NOT INTERRUPT.
8. When Option ROMPaq is finished reprogramming the SMART-2DH
Controller ROM, press Enter if you wish to reprogram another
Compaq option. Repeat steps 4 - 7.
9. If you are finished with reprogramming options, press Esc to exit the
ROMPaq Utility.
10. Remove the Option ROMPaq diskette and reboot the server by cycling
the power (cold boot). To upgrade additional options in the server, repeat
steps 2 - 9 by booting from each Option ROMPaq diskette in succession.
The SMART-2DH Controller ROM has been updated; you can take advantage
of the new or increased capabilities, if any, available with the new firmware.
Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002
Device to reprogram:
Current ROM revision:
Selected ROM revision:
Reprogramming Firmware
CAUTION: Do not interrupt this cycle. Interrupting the ROM
reprogramming will leave the firmware in an unknown state. If
this
happens you may not be able to reprogram the ROM and the
SMART-2DH Controller ROM may have to be replaced. You will
be notified that reprogramming is completed.
File Name: D-CH03.DOC Last Saved On: 2/27/98 11:26 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
ALL COMPAQ SMART-2DH Controller(s)
COMPAQ SMART-2DH Controller x.xx
COMPAQ SMART-2DH Controller y.yy