Compaq 219700-001 - ProLiant - 1500 Reference Manual page 177

H-2 POST Error Messages
POST Error Messages
1726 Slot x Drive Array - Array Accelerator Memory
Size Change Detected.
1727 Slot x Drive Array - New Logical Drive(s)
Attachment Detected. If more than 32 logical
drives, this message will be followed by:
Auto-configuration failed: Too many logical
drives.
Slot x Drive Array - Capacity Expansion
Process is Temporarily Disabled (followed by
1764
one of the following:)
1. Expansion will resume when Array
Accelerator has been reattached.
2. Expansion will resume when Array
Accelerator has been replaced.
3. Expansion will resume when Array
Accelerator RAM allocation is successful.
4. Expansion will resume when Array
Accelerator battery reaches full charge.
5. Expansion will resume when Automatic
Data Recovery has been Completed.
(RESUME = F1 KEY)
1765 Slot x Drive Array Option ROM Appears to
Conflict with an ISA Card - ISA cards with
16-bit memory cannot be configured in
Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002
continued
File Name: O-APPH.DOC Last Saved On: 2/27/98 12:10 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
This message indicates that the array
accelerator configuration has been updated
automatically due to replacement of the Array
Accelerator (or controller) with one having
different memory size. Select F1 key to
resume.
This message indicates that the controller has
detected an additional array of drives that was
attached when the power was off. The logical
drive configuration information has been
updated to add the new logical drives. The
maximum number of logical drives supported
is 32-additional logical drives will not be added
to the configuration. Select F1 key to resume.
The capacity expansion process has been
temporarily disabled for the reason indicated,
and will automatically resume. If the array
accelerator has been removed, you must
reinstall it for capacity expansion to continue.
Remove or reconfigure the conflicting ISA card,
referring to the directions provided with the ISA
card. Alternatively, the Option ROM can be
continued