Compaq 219700-001 - ProLiant - 1500 Reference Manual page 37

Running the System
Configuration Utility
To run the System Configuration Utility:
1. Place the Compaq SmartStart and Support Software CD in the server
CD-ROM drive.
or
Place the System Configuration Utility diskette 1 in the server
floppy drive.
2. Reboot the server.
3. During the boot process, several messages are displayed. Among these
will be a notice that one or more SMART-2DH Controllers were
detected in option slots, and a recommendation to run the System
Configuration Utility.
4. If prompted, press F1 to resume booting.
5. If you are using the Compaq SmartStart and Support Software CD,
select Run the System Configuration Utility from the main menu
screen.
6. If you are given a choice of Auto Configuration, choose Yes.
7. The system loads configuration files for all detected devices.
8. In the Configuration Complete screen, be sure to choose Review or
modify hardware settings.
9. From the next screen, Steps In Configuring Your Computer, select
Step 3: View or edit details.
10. The View Or Edit Details screen is where you will set the SMART-
2DH Controller(s) configuration parameters. Scroll down to the option
slot for the first SMART-2DH Controller and edit each parameter
according to the following information.
Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002
File Name: E-CH04.DOC Last Saved On: 2/27/98 11:28 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
SMART-2DH Array Controller Reference Guide
4-3