Compaq 219700-001 - ProLiant - 1500 Reference Manual page 150

Daz-9-13.EPS
Figure D-10. Begin Capacity Expansion by adding more physical drives
When initiated by the Array Configuration Utility, the SMART-2DH
Controller will automatically redistribute the data in the original logical drive
to a logical drive that spans all of the physical drives in the array, including
the added drives. The room left over is used to create additional logical drives,
also spanning all physical drives. Both logical drives are then included in the
drive array with expanded storage capacity. See Figure D-11.
Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002
File Name: K-APPD.DOC Last Saved On: 2/27/98 12:06 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Original
Logical
Drive
Added
Physical
Drives
SMART-2DH Array Controller Reference Guide
D-17