BMW R 1200 C Repair Manual page 247

•
Remove the horn.
•
Remove the air guides to the oil cooler.
•
Remove the oil cooler.
•
Remove frame.
L
Note:
Only loosen the threaded connections at the lower
rear frame.
•
Install by following the above work instructions in
the reverse order.
X
Tightening torque:
Fork bridge to frame
(clean thread + Loctite 243)........................ 130 Nm
Threaded connections between frame and engine
Front ............................................................ 82 Nm
Rear ............................................................. 58 Nm
46.7