Installing main bearing
•
Insert tensioner rail/slide rail pivot pin (1) for
centering purposes.
•
Tighten M8 and M10 housing screws.
X
Tightening torque/tightening order:
1. M 10 screw (oiled) .................................... 45 Nm
2. M 8 screw (oiled) ...................................... 20 Nm
•
Measure main bearings front/back in the load di-
rection.
•
Enter measured values on record sheet and de-
termine main bearing play values.
............................................See Technical data
a
1
Measuring axial bearing play
•
•
•
•
•
a
Place crankshaft in engine block.
Insert tensioner rail/slide rail pivot pin (1) for
centering purposes.
Tighten housing screws.
Screw measuring device, BMW No. 00 2 500,
with dial gauge, BMW No. 00 2 510, into tapped
hole for alternator carrier cover.
Move crankshaft forwards and backwards and
read off play at dial gauge.
............................................See Technical data
RS110320
00 2 500
00 2 510
RS110910
11.43