Dismantling/Reassembling Alternator; Checking Alternator; Checking Armature For Short To Ground (Earth) - BMW R 1200 C Repair Manual

1
2
Dismantling/reassembling
alternator
•
Take out the cover retaining screws (1).
•
Release clips (2) and remove the cover.
•
Remove voltage regulator (3).
•
Remove the Poly-V belt pulley.
•
Install by following the above work instructions in
the reverse order.
X
Tightening torque:
Belt pulley at alternator................................. 50 Nm
3

Checking alternator

•
Test with BMW MoDiTeC.
Checking armature for short to ground
(earth)
•
Test with BMW MoDiTeC.
RS120050
12.7