Dismantling/reassembling
telescopic fork
Dismantling telescopic fork
•
Remove bleed screw (1).
•
Pull out fixed tube/drain oil.
•
Carefully press off chromium plated cap (2) at
groove.
•
Lever out the dust sleeve (3).
e
Caution:
Do not damage fork slider tube.
•
Remove retaining ring (4).
•
Lever out shaft seal (5).
•
Remove washer (6).
31.10
1
2
3
4
5
6
Assembling telescopic fork
•
Fill with oil.
Qualtity per
fixed tube .... 0.470 l (0.82 Imp. pint/0.49 US quart)
Oil grade
in telescopic fork:............. BMW telescopic fork oil
L
Note:
No oil changes required during services: unit is
maintenance-free.
•
Install fixed tube.
•
Install washer (6).
•
Oil the shaft seal slightly and push it on as far as
possible (to stop on slider tube) by striking it
lightly with drift, BMW No. 31 5 610, and reduc-
ing adapter, BMW No. 31 5 613.
•
Install retaining ring and dust cover.
•
Attach the chromium plated cap.
•
Insert bleed screw (1).
•
Bleed telescopic fork in no-load position.
X
Tightening torque:
Screw plug to
fixed fork tube ................. press-fit - do not remove!
C310010