Installing Selector Shaft; Installing Selector Drum - BMW R 1200 C Repair Manual

3
11

Installing selector shaft

2
•
Place a spacing washer of the determined thick-
ness in position and install selector shaft (1).
•
Engage torsion spring (2) in the housing.
10 9
1
C230060

Installing selector drum

•
Place a spacing washer of the determined thick-
ness and the input-side thrust washer on selec-
tor drum (6) and secure with a small amount of
grease.
•
Swing locking lever (8) out towards the edge of
the cover and install the selector drum.
•
Swing locking lever (8) towards selector drum (6)
and engage it in position together with guide
plate (7).
•
Place shift forks (5, 10) in the guide tracks.
•
Install selector shafts (3).
•
Install locking pin (11).
•
Place thrust washer (4) on the selector drum.
3
4
5
6
7
8
C230030
23.23