5-2
1. When the Message "The current Paper Drawer is empty." Appears
Adding paper
1st Drawer
Slide out the 1st Drawer.
1
Load the paper stack into the Drawer so that
2
its front side faces down.
NOTE
The paper should be loaded no higher than the
(Max. Level Indicator).
Max.
Max.
1145O555KA
1145O555KA
When the drawer currently selected for use runs
out of paper, the message shown on the left
appears. The current copy cycle is interrupted and
you cannot start a new copy cycle. The blinking
drawer has run out of paper.
Add paper by using the following procedure.
1155O226EB
Slide the Drawer back in.
3
1075O101DA
1161O009AA
1161O095DA