NEC POWERMATE 5100 Service Manual page 78

Use the Policy Editor to configure the traps, communities, and other policies as
follows.
1. In the Windows taskbar, click
and System Tools. Click
2. At the "System Policy Editor," click
Double click
Local Computer
3. Expand Network and expand SNMP to display the list of policies. The
policies are:
T
Communities — Specifies one or more groups of hosts that this
computer belongs to and that can be managed with SNMP.
T
Permitted Managers — Limits the set of SNMP management
applications that can access this computer to those with the IP or IPX
addresses that the user provides.
T
Traps for "Public" Community — Limits the set of computers that
receive traps from this computer to those with the IP or IPX addresses
that the user provides.
Note:
For an SNMP management console, such as the
NEC Desktop Manager and HP OpenView, IP addresses
(for example, 157.123.176.100) must be entered in the
Traps for "Public Community" to receive traps from the NEC
SNMP agents.
For the NEC SNMP Agent to send a trap to the NEC SNMP
Desktop Manager, the port number can be configured from
the registry:
"HKEY_LOCAL_MACHINE\SOFTWARE\Packard Bell
NEC,Inc.\PBNEC SNMP Desktop Agent\Port Number".
The default port number is set to 55593.
T
Internet MIB (RFC 1156) — Allows the user to specify a contact name
and location for the Internet MIB.
4. Check each policy required and highlight the policy name.
T
For Communities, Traps, and Permitted Managers, click
configure the policy as appropriate.
T
Highlighting the
location fields in the Policy window for editing.
T
Click File and click
T
Click and click
File
, and point to Programs, Accessories,
Start
System Policy Editor
and point to
File
.
Internet MIB policy opens the contact name and
Save .
.
Exit
.
Open Registry
and
Show
System Configuration 2-51
.