Uninstalling The Nec Snmp Agent Or Landesk Client Manager; Expansion Slot Locations And Functions - NEC POWERMATE 5100 Service Manual

Uninstalling the NEC SNMP Agent or LANDesk Client Manager

LANDesk Client Manager and the NEC SNMP Agent are not fully compatible
when both are installed on the same computer.
Note:
the NEC SNMP Agent on the same computer.
If both applications have been installed, LANDesk Client Manger does not
function correctly, and cannot display ASIC-related tabs for temperature, fan,
voltage, and chassis intrusion status. In addition, each time the computer is
restarted, a Service Control Manger window displays an error message and
prompts the user to press
If LANDesk Client Manager and the NEC SNMP Agent have
both been installed, it is not possible to remove either
application using the uninstall utility. A full operating system
restore must be performed using the NEC Select Install CD.
If LANDesk Client Manager and the NEC SNMP Agent have both been
installed, it is not possible to remove either application using the uninstall
utility. If you attempt to remove one of the applications, a full operating system
restore will have to be performed using the NEC Select Install CD. After the full
restore, all appropriate applications should be reinstalled from the CD using the
Selective Application Restore program or a setup.exe program. Do not reinstall
both LANDesk Client Manager and the NEC SNMP Agent.

Expansion Slot Locations and Functions

The following figure shows the location of the expansion slots on the rear of the
system and identifies their functions.
A-4 NEC PowerMate 5100 Series Release Notes
Do not install both LANDesk Client Manager and
.
Enter
! CAUTION