Using The Selective Application Restore Program On A Remote Cd; Nec Selective Application Restore Screen - NEC POWERMATE 5100 Service Manual

2. Select the applications to install by double clicking on the item box or line.
A check mark appears in the box.
To deselect an item, double click it again so that the check mark disappears.
Items that appear grayed-out are already installed on the system.
3. Click
OK
The application files reload sequentially, and a progress bar appears for each
application selected.
4. When all the applications have finished installing, remove the CD.
5. Click
Restart Computer
completes successfully.
This completes the Selective Application Restore procedure.
After the Selective Application Restore process completes, install any optional
device drivers using the NEC Driver CD (see "NEC Driver CD).
In addition, after the Selective Application Restore process completes, reinstall
any personal applications. These applications are not on the NEC Select Install
CD and must be reinstalled after the Selective restore process completes.

Using the Selective Application Restore Program on a Remote CD

If the computer is connected to a network and set up to access a shared
CD-ROM drive, a System Administrator can install the applications associated
with the OS from the NEC Select Install CD in the remote CD-ROM drive.

NEC Selective Application Restore Screen

.
to reboot and ensure that the installation process
System Configuration 2-43