Vga Interface Connector; Microphone In Connector; Vga Interface Connector Pin Assignments; Microphone In Connector Pin Assignments - NEC POWERMATE 5100 Service Manual

Hide thumbs Also See for POWERMATE 5100:
Table of Contents

Advertisement

VGA Interface Connector

Video signals are output from the AGP subsystem or PCI video board through a
VGA interface connector, which is a 15-pin, D-subconnector (VESA
VS890803-2) located at the rear of the system unit or in one of the PCI
expansion slots. The following table lists the pin assignments.
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
* Pins 16 and 17 are connector mounting holes connected to logic ground.

Microphone In Connector

The pin assignments for the microphone in connector (J8P2) are provided in the
following table.
Pin
1
2
3
4-22 System Board

VGA Interface Connector Pin Assignments

Signal
Red
Green
Blue
Not used
Red return (ground)
Green return (ground)
Blue return (ground)
Ground
5V (fused)
Logic ground
Not used
DDC DAT
Horizontal sync
Vertical sync
DDC CLK
Logic ground*
Logic ground*

Microphone In Connector Pin Assignments

Signal
Ground
Mic-In
Vic Voltage Ref.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powermate 5100 series

Table of Contents