General Notes; Installing Applications And Online Documentation; Choosing The Correct Installation Method; Installing Applications In The Correct Order - NEC POWERMATE 5100 Service Manual

The PowerMate 5100 Series Release Notes provide up-to-date information on
installing the applications that come with your computer. These notes also
provide additional valuable information about your computer that was not
included in the printed user's guide or online NEC Help Center.

General Notes

The following notes describe general system behaviors and recommended
operating procedures not documented in other PowerMate 5100 Series
documentation.

Installing Applications and Online Documentation

The system comes with the operating system preloaded. All other applications
and the online documentation are installed from the NEC Select Install CD.
Follow the guidelines in this section when installing applications, the NEC Help
Center online documentation, and the Healthy Environment online brochure.

Choosing the Correct Installation Method

Most applications and the online documentation are installed from the NEC
Select Install CD using the Selective Application Restore program. However,
the NEC SNMP Agent and the NEC WebTelligent software are both installed
using a Setup.exe program launched from a subdirectory on the NEC Select
Install CD. In addition, LANDesk
the Start button on the taskbar as described in the following section.

Installing Applications in the Correct Order

®
Microsoft
Select Install session. LANDesk Client Manager must also be installed alone in
a separate Select Install session, and before certain other applications. The NEC
SNMP Agent and LANDesk Client Manager should not both be installed on the
same computer. Use the following steps to install applications and online
documentation.
1. Install Microsoft Internet Explorer first and alone, before installing any other
application on the NEC Select Install CD.
2. Install and set up LANDesk Client Manager alone and before installing NEC
Security, Cheyenne Backup utility, NEC Configuration Change Notification,
the NEC Auto Backup utility, or NEC WebTelligent.
Note:
set up before any of the applications or utilities that function
in conjunction with it. Install NEC Security, Cheyenne
Backup utility, the NEC Configuration Change Notification,
NEC Auto Backup utility, and the NEC WebTelligent
software after installing LANDesk Client Manager.
A-2 NEC PowerMate 5100 Series Release Notes
®
Internet Explorer must be installed first and alone in a separate
LANDesk Client Manager should be installed and
®
Client Manager (LDCM) is installed from