Boot Menu; Power Menu Options; Boot Menu Options - NEC POWERMATE 5100 Service Manual

Menu Item
Power Management
Fan Always On
Inactivity Timer
Hard Drive
VESA Video Power Down

Boot Menu

The Boot menu offers the options listed in the following table.
Menu Item
Quick Boot Mode
Fixed Disk Boot Sector
After Power Failure
2-22 System Configuration

Power Menu Options

Settings and Descriptions
Settings: Disabled, Enabled (default).
When set to Enabled, all other Power Management options
can be configured.
No, Yes
Select Yes to force the fan to remain on when the system is in
a powered-managed state.
Settings: Off, 5 minutes, 10 minutes, 20 minutes (default), 30
minutes, 1 hour, 2 hours.
Sets how long the system must remain inactive before it enters
a power saving suspend mode.
Settings: Disabled, Enabled (default).
When set to Enabled, the hard drive is subject to power
management.
Settings: Standby (default), Disabled, Suspend.
When set to Enabled, video is subject to power management.

Boot Menu Options

Settings and Descriptions
Enabled (default), Disabled.
When set to Enabled, certain tests are skipped during boot, to
decrease the time it take to boot.
Normal (default), Write Protect.
When set to Write Protect, the fixed disk boot sector is write-
protected against viruses.
Power On, Stay Off, Last State (default).
When After Power Failure is set to Power On, the system
powers on after a power failure. With the Stay Off setting, the
system does not power on after a power failure. With the Last
State setting, the system powers on only if it was powered on
when the power failure occurred.
If the After Power Failure field is set to Stay Off, the On LAN
boot option does not work, even if the On LAN field is set to
Enabled.