NEC POWERMATE 5100 Service Manual page 75

Do not select and install drivers for any hardware that is not
currently installed on the system. Doing so can damage the
operating system.
1. Install the device requiring the new driver before installing the driver.
2. In Windows 95 or Windows 98 systems only, set up the system for sharing
files as follows. On Windows NT systems, go to step 3.
T
Click
T
Double click the
T
Click
T
Click the top box ("I want to give other access to my files") so a check
mark appears.
T
Click
3. Insert the NEC Driver CD into the shared CD-ROM drive.
4. Do a map connection to the shared CD-ROM drive.
T
From the system with the shared CD-ROM drive, double click
Computer
click on
T
In the popup menu, right click on
appears.
T
In the Properties screen, click
T
On Windows 95 or Windows 98 systems, type a name in the Share
Name field. (For example, type
On Windows NT systems, click the
name in the Share Name field. (For example, type
field.)
T
Click
5. On the Client desktop, double click
6. Double click
7. Click the name of the computer with the shared CD-ROM drive. Double
click the name of the shared CD-ROM drive.
8. Access the subdirectory that corresponds to the driver being installed.
9. Double click the
2-48 System Configuration
! CAUTION
Start , select Settings
Network icon.
File and Print Sharing
. The driver installs and the system reboots.
OK
and right click on the CD-ROM drive. (For example, right
E: if the shared CD-ROM drive is designated as drive E.)
return to the Properties screen.
OK to
.
Entire Network
icon corresponding to the driver being installed.
setup.exe
, then highlight and select
.
Sharing . The Properties screen
Shared As .
in the field.)
CD-ROM
button, then type a
New Share
Network Neighborhood
Control Panel .
My
in the
CD-ROM
.