NEC POWERMATE 5100 Service Manual page 137

This section shows the following riser board connector locations, connector pin
assignments, jumper locations, and jumper settings:
T
subsystem cable connectors
T
IDE and diskette drive cable connectors
T
PCI and ISA cable connectors
T
power supply connectors
T
jumper settings
5-2 Riser Board
CD audio in connector
modem in connector
Wake-On LAN connector
Wake on LAN technology enables remote wakeup of the computer
through a network. Wake on LAN technology is available on the
riser board or else the system requires a PCI add-in network interface
card (NIC) with remote wakeup capabilities. The remote wakeup
connector on the NIC must be connected to the onboard Wake on
LAN connector. The NIC monitors network traffic at the Media
Independent Interface (MII); upon detecting a Magic Packet, the
NIC asserts a wakeup signal that powers up the computer.
chassis intrusion connector
speaker connector
fan connector
NLX connector
LAN connector
IDE cable connectors
diskette drive cable connector
PCI cable connectors
ISA cable connectors
main power
optional power
LAN jumper settings
fan jumper settings.