NEC POWERMATE 5100 Service Manual page 207

T
In Windows 95 and Windows 98 systems, press
, scroll over and highlight
Programs
Client LDCM Setup
automatically.)
T
After LDCM installation completes, remove the NEC Select Install CD.
T
Reboot the system.
Note:
After installing LANDesk Client Manager for the
first time, a non-critical error message may appear after the
system reboots. Simply reboot the system again to clear the
error message.
3. Read the following information to ensure that you properly set up your
system configuration.
T
Do not install both the NEC SNMP Agent and LANDesk Client Manager
on the same computer. The two applications are incompatible, and neither
can be removed using the uninstall utility. To remove them, a full restore
must be performed after which all applications must be reinstalled.
Do not install both the NEC SNMP Agent and LANDesk
Client Manager on the same computer.
T
The NEC SNMP Agent and the NEC WebTelligent software are each
installed using a Setup.exe program launched from a subdirectory on the
NEC Select Install CD. These applications can be installed without regard
to the order in which other applications are installed.
T
Applications other than LANDesk Client Manager, Internet Explorer, the
NEC SNMP Agent, or the NEC WebTelligent software can be installed
during the same Select Install session or, if installed in different sessions,
in any order once Internet Explorer and LANDesk Client Manager are
installed.
T
Install the NEC Help Center after installing Microsoft Internet Explorer
4.01 on the system. The Help Center cannot run without Microsoft
Internet Explorer 4.01 and it cannot be installed from the NEC Select
Install CD unless Internet Explorer 4.01 has already been installed.
Note:
Install the NEC Help Center after installing
Microsoft Internet Explorer 4.01 on the system. The Help
Center cannot run without IE 4.01 and it cannot be installed
unless IE 4.01 has already been installed.
Intel LANDesk Setup
. (In Windows NT systems, the installation starts
! CAUTION
NEC PowerMate 5100 Series Release Notes A-3
Start , highlight
, and select