ZyXEL Communications IES-1248 VDSL-SWITCH User Manual page 74

IES-1248 User's Guide
LABEL
System up Time This field shows how long the system has been running since the last time it was started.
The following fields are related to the Ethernet ports.
ENET This field displays the number of the Ethernet port. Click a port number to display that port's
statistics screen (refer to 9.2.1).
Port Name This field displays the name of the Ethernet port.
Link This field displays whether the Ethernet port is connected (Up) or not (Down).
Media This field displays the type of media that this Ethernet port is using for a connection (Copper or
Fiber). "-" displays when the port is disabled or not connected.
Duplex This field displays whether the port is using half or full-duplex communication. "-" displays when
the port is disabled or not connected.
Up Time This field shows the total amount of time in hours, minutes and seconds the port's connection
has been up. "--:--:--" displays when the port is disabled or not connected.
The following fields are related to the ADSL ports.
xDSL This identifies the ADSL port. Click a port number to display the ADSL Port Details screen (refer
to 9.2.2).
Status This field shows whether the port is connected (Up) or not (Down).
Mode This field shows which ADSL operational mode the port is set to use. "-" displays when the port is
not connected.
Tx/Rx KB/s This field shows the number of kilobytes per second that a port is set to transmit and receive.
Interleave/Fast This field shows the port's ADSL latency mode (fast or interleave).
Up Time This field shows the total amount of time in hours, minutes and seconds the port's connection
has been up. "-" displays when the port is not connected.
The following fields and buttons apply to the whole screen.
Poll Interval(s) The text box displays how often (in seconds) this screen refreshes. You may change the refresh
interval by typing a new number in the text box and then clicking Set Interval.
Stop Click Stop to halt system statistic polling.
Clear Counter Select a port from the Port drop-down list box and then click Clear Counter to erase the
recorded statistical information for that port.
9.2.1 Ethernet Port Statistics
In the Home screen, click an Ethernet port's number to display that port's statistics screen as shown next.
9-2
Table 9-1 Home
DESCRIPTION
Home and Port Statistics Screens