IES-1248 User's Guide
COMMAND
queuemap
garptimer
rstp
dhcprelay
28-8
Table 28-1 Commands
profile
show
set
show
join
leave
leaveall
show
enable
disable
priority
hellotime
maxage
fwdelay
port
set <name> <index>
<startip> <endip>
delete <name>
show [<name>|*]
<priority> <queue>
<join msec>
<leave msec>
<leaveall msec>
<priority>
<hellotime sec>
<maxage sec>
<fwdelay sec>
show
enable
disable
priority
pathcost
DESCRIPTION
Configures an IGMP filter
profile.
Removes an IGMP filter
profile.
Displays an IGMP filter
profile's settings.
Displays the system's priority
level to physical queue
mapping.
Maps a priority level to a
physical queue.
Displays the GARP timer
status.
Sets the GARP timer's Join
Timer.
Sets the GARP timer's Leave
Timer.
Sets the GARP timer's Leave
All Timer.
Rapid STP commands (refer
to IEEE Std 802.1w).
Displays the RSTP settings.
Turns on RSTP.
Turns off RSTP.
Sets the system's priority.
Sets the hello timer.
Sets the max age timer.
Sets the forward delay time.
Displays the Ethernet ports'
RSTP settings.
Enables RSTP on this port.
Disables RSTP on this port.
Sets the specified port's
priority.
Sets the specified port's path
cost.
Commands