ZyXEL Communications IES-1248 VDSL-SWITCH User Manual page 103

LABEL
Add, Apply
Cancel
Show Port
Index
Port
VPI/VCI
VC Profile
PVID
Priority
ADSL Port Setup
Table 11-4 VC Setup
Click Add to add channel settings on a port.
Click Apply to save channel setting changes for a port.
Clicking Add or Apply to saves your changes to the IES-1248's volatile memory.
The IES-1248 loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile memory when
you are done configuring.
Click Cancel to start configuring the screen again.
Select the number of an ADSL port for which to display VC settings (or display all of them).
This field displays the number of the PVC. Click a PVC's index number to use the top of
the screen to edit the PVC.
At the time of writing, you can only edit the VC profile. If you want to change
other settings, add a new PVC with the desired settings. Then you can
This field displays the number of the ADSL port on which the PVC is configured.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The
VPI and VCI identify a channel on this port.
Click a link in the VPI/VCI column to open a screen where you can edit the VPI/VCI
settings.
This shows which VC profile the channel is set to use.
This is the PVID (Port VLAN ID) assigned to untagged frames or priority frames (0 VID)
received on this channel. An asterisk (*) denotes a super channel.
This is the priority value (0 to 7) added to incoming frames without a (IEEE 802.1p) priority
tag. An asterisk (*) denotes a super channel.
DESCRIPTION
delete any unwanted PVCs.
IES-1248 User's Guide
11-9