ZyXEL Communications IES-1248 VDSL-SWITCH User Manual page 198

IES-1248 User's Guide
COMMAND
mac
pktfilter
dot1x
28-10
Table 28-1 Commands
flush
agingtime
count
filter
show
set
show
enable
disable
set <vid>
show
set
<sec|0:disabled>
show [portlist]
enable <portlist>
disable <portlist>
set <portlist>
<count>
show [portlist]
enable [portlist]
disable [portlist]
set <port> <mac>
[<mac> <mac> ...]
delete <port> <mac>
[<mac> <mac> ...]
[portlist]
<portlist> [filter]
[portlist]
DESCRIPTION
Sets the VLAN ID of the
management VLAN.
Clears learned MAC
addresses from the
forwarding table.
Displays the MAC aging out
time period.
Sets the MAC aging out time
period.
Displays the system's current
MAC address count settings.
Turns on the MAC address
count filter for a port(s).
Turns off the MAC address
count filter for a port(s).
Sets the MAC address count
filter for a port(s).
Displays MAC filter settings.
Turns on the MAC filter.
Turns off the MAC filter.
Adds a MAC filter MAC entry.
Removes a MAC filter MAC
entry.
See Chapter 34 for how to
configure packet filters.
Displays packet type filter
settings.
Sets the packet type filter for
a specific port.
Displays IEEE 802.1X
settings.
Turns on IEEE 802.1X.
Turns off IEEE 802.1X.
Commands